
| Product Life Cycle | |
| Availability: | Obsolete with alternative(已停产,有替代型号) |
| Last Order Date: | 2024-08-02 |
| Last Delivery Date: | 2024-12-31 |
| Technical Data | |
| Product Family: | Valve Connectors(阀门连接器) |
| Side 1 Product Sub Family: | GDM Legacy |
| Brand: | Hirschmann(赫斯曼) |
| Connector Type: | Field Attachable(现场装配型) |
| Connector Sub Type: | Form A |
| Side 1 Type of Contact/Gender: | Socket Contacts / Female(孔式触点/母头) |
| Connector Design: | Form A | Female | 2+PE | 90°(A 型/母头/2+PE/90°弯角) |
| Number of Pins: | 2+PE (PE across cable outlet) |
| Coding, Side 1: | A |
| Shielding Type: | Unshielded(非屏蔽) |
| Attachment Type: | Central Screw, M 3 x 35(中央螺钉 M3×35) |
| Replaced by: | ID: 934888172 Name: GDM21F6-L1C-10D |
| Voltage Rating: | 13.2 V |
| Operating Voltage: | 12 V DC |
| Current Rating: | 10 A |
| Side 1 Contact Resistance: | ≤ 10 mOhm |
| Insulation Resistance: | > 10⁹ Ohm |
| Mating Cycles: | ≤ 50 |
| Type of Connection: | Screw terminal(螺钉接线) |
| Cable Gland: | PG9 |
| Thread Size: | PG 9 |
| Cross Section: | 0.25 - 1.5 mm² |
| Suitable Cables: | Ø 4.5 - 7.5 mm |
| Ambient Temperature (Operation)*: | -25 °C to +80 °C |
| Protection Degree / IP Rating**: | IP65 |
| Side 1 Design Standard: | DIN EN 175301-803-A, ISO 4400 |
| Side 1 Pollution Degree: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Clearance / Creepage Distance: | DIN EN 60664-1 (2008/01); VDE 0110-1 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Materials | |
| Contact Base Material: | Brass (CuZn)(黄铜) |
| Side 1 Contact Plating: | Copper-Tin Alloy (Cu/Sn)(铜底镀锡) |
| Contact Bearer Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Contact Bearer Color: | Brown(棕色) |
| Flammability Class (Contact Bearer): | UL 94 V-0 |
| Housing Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Housing Color: | Translucent(半透明) |
| Flammability Class (Housing): | UL 94 HB |
| Cable Gland Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Cable Gland Gasket: | Nitrile Butadiene Rubber (NBR)(丁腈橡胶),配件号 269604000 |
| Cable Gland Color: | Black(黑色) |
| Flammability Class (Cable Gland): | UL 94 HB |
| Attachment Material: | Steel Fastener (4.8, Fe/Zn B)(钢质紧固件,镀锌) |
| Gasket Material: | Sold separately(密封垫圈单独配置) |
| Protection Circuitry | |
| Function Indicator: | Glow Lamp(氖灯指示) |
| Protective Circuit: | No Protective Circuit(无保护电路) |
| Additional Technical Data | |
| Fastening Torque (Contact Screw): | (50-60) Ncm |
| Fastening Torque (Cable Gland): | (250-375) Ncm |
| Fastening Torque (Attachment): | (50-60) Ncm |
| Mount Type: | central screw M 3x35(中央螺钉安装) |
| Safety & Environmental Compliance | |
| REACH: | Compliant(合规) |
| RoHS Compliant: | Compliant(合规) |
| Notes | |
| Note Derating: | Notice derating(注意降额使用) |
| Protection Degree / IP Rating Note: | Protection Degree and IP Rating per test standard IEC 60529 using a Hirschmann / Lumberg Automation mating product(依 IEC 60529 标准,与赫斯曼/隆堡配套对接件装配测试) |
A型,18毫米-女性斜角|#触点:2+接地(PE),螺钉类型|LED红色|12V/10A|半透明外壳,黑色PG9电缆接头|包含:中央螺丝批量包装
生命周期状态:已停产
| 项目 | 本型号(12 V 版本) | 上一份(110 V 版本) |
|---|---|---|
| 工作电压 | 12 V DC | 110 V AC/DC |
| 电压额定值 | 13.2 V | 120 V |
| 额定电流 | 10 A | 8 A |
| 生命周期 | Obsolete with alternative(已停产,有替代型号) | Active - under EOL consideration(在售,已列入停产评估) |
| 替代型号 | GDM21F6-L1C-10D(934888172) | GDM21F6-L11-10D(934888019) |
| 订货号 | 本份源文件里没有 Variants 表,因此未提供订货号 | 927801110 |
这份是 GDM 2009 UL 系列的 12 V DC 版本,和上一份 110 V 版本属于同一产品形态、同一外壳平台;两者的唯一差别在电气参数:它接的是 12 V 直流回路,并带有氖灯指示。
其余各项两者完全一致:PG9 出线口(Ø4.5–7.5 mm)、棕色 V-0 触点座、半透明外壳和黑色格兰头、氖灯指示、无保护电路、-25~+80 ℃、IP65、触点螺钉扭矩 50-60 Ncm、格兰头扭矩 250-375 Ncm。
两处注意
这份原厂页面没有 Approvals(认证)章节,也没有 Variants(变体)表格;因此在成品里,我按原资料的内容保留了 7 张表,既没有补出认证信息,也没有补出订货号。
12 V DC 加 10 A,是典型的直流电磁阀、小型直流线圈工况。由于已停产,替代型号 GDM21F6-L1C-10D 同样属于 GDM21F 系列,而该系列与 Legacy 的 GDM 2009 在内部结构和接线端布局上并不通用;换型时最好连插头、密封圈和螺钉一起更换。

