
| Product Life Cycle: | |
| Availability: | Active - under EOL consideration(在售,已列入停产评估) |
| Discontinuation Announcement Date: | 2025-11-12(停产公告日) |
| Last Order Date: | 2025-11-12(最后下单日) |
| Last Delivery Date: | 2025-11-12(最后交货日) |
| Technical Data: | |
| Product Family: | Valve Connectors(阀门连接器) |
| Side 1 Product Sub Family: | GDM Legacy: |
| Brand: | Hirschmann(赫斯曼) |
| Connector Type: | Field Attachable(现场装配型) |
| Connector Sub Type: | Form A: |
| Side 1 Type of Contact/Gender: | Socket Contacts / Female(孔式触点/母头) |
| Connector Design: | Form A | Female | 2+PE | 90°(A 型/母头/2+PE/90°弯角) |
| Number of Pins: | 2+PE (PE across cable outlet) |
| Coding, Side 1: | A |
| Shielding Type: | Unshielded(非屏蔽) |
| Attachment Type: | Central Screw, M 3 x 35(中央螺钉 M3×35) |
| Replaced by: | ID: 934888965 Name: GDM21F9-D2C-10D |
| Voltage Rating: | 24 V |
| Operating Voltage: | 24 V DC |
| Current Rating: | 10 A |
| Side 1 Contact Resistance: | ≤ 10 mOhm |
| Insulation Resistance: | > 10⁹ Ohm |
| Mating Cycles: | ≤ 50 |
| Type of Connection: | Screw terminal(螺钉接线) |
| Cable Gland: | PG9: |
| Thread Size: | PG 9: |
| Cross Section: | 0.25 - 1.5 mm² |
| Suitable Cables: | Ø 4.5 - 7.5 mm |
| Ambient Temperature (Operation)*: | -25 °C to +80 °C |
| Protection Degree / IP Rating**: | IP65: |
| Side 1 Design Standard: | DIN EN 175301-803-A, ISO 4400: |
| Side 1 Pollution Degree: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Clearance / Creepage Distance: | DIN EN 60664-1 (2008/01); VDE 0110-1 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1): |
| Materials: | |
| Contact Base Material: | Brass (CuZn)(黄铜) |
| Side 1 Contact Plating: | Copper-Tin Alloy (Cu/Sn)(铜底镀锡) |
| Contact Bearer Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Contact Bearer Color: | Brown(棕色) |
| Flammability Class (Contact Bearer): | UL 94 V-0: |
| Housing Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Housing Color: | Translucent(半透明) |
| Flammability Class (Housing): | UL 94 HB: |
| Cable Gland Material: | Glass-Fiber Reinforced Polyamide (PA GF)(玻纤增强尼龙) |
| Cable Gland Gasket: | Nitrile Butadiene Rubber (NBR)(丁腈橡胶),配件号 269604000 |
| Cable Gland Color: | Black(黑色) |
| Flammability Class (Cable Gland): | UL 94 HB: |
| Attachment Material: | Steel Fastener (4.8, Fe/Zn B)(钢质紧固件,镀锌) |
| Gasket Material: | Sold separately(密封垫圈单独配置) |
| Protection Circuitry: | |
| Function Indicator: | Glow Lamp(氖灯指示) |
| Protective Circuit: | Recovery Diode (FRD) 1N4007(续流二极管,型号 1N4007) |
| Additional Technical Data: | |
| Fastening Torque (Contact Screw): | (50-60) Ncm |
| Fastening Torque (Cable Gland): | (250-375) Ncm |
| Fastening Torque (Attachment): | (50-60) Ncm |
| Mount Type: | central screw M 3x35(中央螺钉安装) |
| Safety & Environmental Compliance | |
| REACH: | Compliant(合规) |
| RoHS Compliant: | Compliant(合规) |
| Notes: | |
| Note Derating: | Notice derating(注意降额使用) |
| Protection Degree / IP Rating Note: | Protection Degree and IP Rating per test standard IEC 60529 using a Hirschmann / Lumberg Automation mating product(依 IEC 60529 标准,与赫斯曼/隆堡配套对接件装配测试) |
传感器 · M12 航插线材 · 赫斯曼(Hirschmann)插头 一站式供应
供应商信息:深圳市友情实业科技有限公司
联系电话:132-4242-2023(周一至周六 8:30–18:00) 邮箱:328034812@qq.com
官方网站:www.shilin8.com 地址:深圳市福田区沙头街道天安社区泰然六路泰然苍松大厦十五层
GDM2009LED241N4007 ME-GDM-DIN阀门连接器|Form A|18mm#触点:2+接地|半透明外壳PG9螺纹|恢复二极管(FRD)&LED24V
FormA女性斜角接口|#触点:2+接地(PE),螺钉型|回收二极管&LED红色24V/10A半透明外壳,黑色PG9电缆接头|包装内含:中央螺丝|散装包装
生命周期状态:有限供应/停产
替换为:GDM21F6-V21-10D
这份参数表对应 24 V DC 带氖灯和续流二极管(1N4007)的 GDM Legacy 款,替代型号是 GDM21F9-D2C-10D(订货号 934888965)
| 项目 | 本型号 | 说明 |
|---|---|---|
| 工作电压 | 24 V DC | 注意只标 DC,并非 12-24 V 宽压 |
| 额定电流 | 10 A | —— |
| 功能指示 | Glow Lamp(氖灯) | 24 V 直流用氖灯较少见,实际亮度会偏暗 |
| 保护电路 | FRD 1N4007(续流) | 抑制最彻底,但释放最慢 |
| 出线口 | PG9,Ø4.5–7.5 mm | —— |
| 触点座 | Brown,UL 94 V-0 | 高阻燃 |
| 外壳 | Translucent 半透明 | 便于观察指示灯 |
| 温度 | -25~+80 ℃ | 比其他型号 -40~+125 窄很多 |
| 替代型号 | GDM21F9-D2C-10D(934888965) | 注意前缀是 GDM21F9,并非 GDM21F6 |
三个值得注意的点
替代型号用的是 GDM21F9 系列,此前几份替代型号都是 GDM21F6、GDM2109。这说明原厂的替代方向分成多条线,21F6 是 110V/宽压带灯型,21F9 很可能是 24V 直流专用型。换型时不要想当然地拿 GDM21F6 去替。
24 V 直流配氖灯,本身就很矛盾。氖灯起辉需要较高电压,24 V 下往往只能微弱发光甚至不亮。如果客户靠这只灯判断线圈是否得电,实际体验会很差,更容易误判成故障。遇到这种反馈,别急着换件,先确认是 “灯本身在这个电压下就不亮”。
温度只有 -25~+80 ℃。如果客户现场在户外或高温车间,这款的余量远不如 -40~+125 ℃ 的通用款,选型时要单独提出来。

